Take better photos with a premiere quality 6K sensor from Autel Robotics. The Autel Robotics EVO II 6K Pro v3 aircraft comes with a variety of bundled options. Select from the Rugged, RTK Rugged or Enterprise bundles. Note that the type of controller you receive will change with the selection. Two types of controllers are available.

This v3 aircraft is similar to the previous v2 model with some new additional enhancements. Longer flight distance, larger camera sensor, optimized onboard intelligence, and RemoteID compliance onboard readiness.

FEATURES

Touch screen smart controller: v3 or SE model
20 megapixel 1-inch CMOS sensor, FOV 82°, 29mm lens
Supports up to 6K @ 30 fps and up to 5.5K @ 60 fps
Adjustable Aperture: F2.8~F11
Max image size: 5472 x 3648
16x digital zoom with 3x lossless zoom
HDR and intuitive camera controls
Max Flight Time: 38-45 Min
Max Signal Range: Up to a 9 miles
Max Fight Speed: Up to 48 mph
Wind Resistance: Level-7 (39-mph)
360° Obstacle Avoidance
AI/Machine Learning enabled collision avoidance system:
RemoteID: Onboard, FAA Approved
Low Noise Propellers
Max Payload: 2 pounds
Manufacturer controlled Geo-Zone Restricting, Non-Existent
Able to integrate with the LiveDeck 2 video streaming system.
This aircraft is not IP-rated
Manufacturer warranty: 1 year

VISIBLE CAMERA SENSOR

Capture stunning photographic and video imagery through the paired 20 megapixel 1-inch RYYB CMOS camera sensor. This upgraded camera supports up to 4K HDR video and receives up to 40% more light compared to the previous model. This sensor additionally supports the moonlight 2.0 algorithm which offers noise suppression in low light scenarios. The camera can automatically balance overexposure and underexposure when shooting scenes with too much contrast thanks to the PDAF (Phase Detection Auto Focus) and CDAF (Contrast Detection Auto Focus) enhancements.

SMART CONTROLLER v3 -vs- SMART CONTROLLER SE
Autel also is introducing two different types of Smart Controllers and pairing certain models with different bundles. If you select the 'Rugged' style, an Autel Remote Control SE will come with your order. The SE model is 6.4-inch OLED touch screen with no customizable buttons. The unit will take 2-hours to charge and has a 3-hour runtime at maximum brightness setting. This controller is not compatible with prior v2 or v1 EVO II model aircraft but does have expansion slots to support 4G/5G connectivity in the future.

The other style selections will trigger a Autel Smart Controller v3 to be sent instead. This controller has a 7.9-inch touch screen with two customizable buttons and a 2048x1536 resolution 2000 nit display. This unit will take 2-hours to charge and can run for approx 3-hours at maximum brightness setting. This controller is not compatible with prior v2 or v1 EVO II model aircraft but does have expansion slots to support 4G/5G connectivity in the future.

COMPATIBILITY
This v3 aircraft is backwards compatible with the following EVO II v2 accessories:
Intelligent Flight Batteries | Propellers | Car charger | Multi-charging hub | Gimbal guards | Foxfury related products: 7-pt harness, D3060 & D10 light kits and the Exolander.

Both v1 and v2 smart controllers are not compatible with the v3 model. Camera gimbals can no longer be hot-swapped. v1 and v2 are compatible with each other. v3 is not.

SPECS

EVO II 6K Pro V3 Specifications
Aircraft
Takeoff weight	1191 g
Max takeoff weight	2000 g
Wheelbase	397 mm
Size(LWH)	230130108mm（folded） 457558108mm（unfolded）
Maximum service ceiling altitude	7000 m
Max ascent speed	8 m/s (Ludicrous)
Max descent speed	4 m/s (Ludicrous)
Max horizontal flight speed	20m/s (Ludicrous)
Max flight distance (no wind)	25 km
Max tilt angle	33° (Ludicrous)
Max angular velocity	120°/s
Max flight time (no wind)	40 min
Max hovering time (no wind)	35 min
Operating temperature range	-10℃ ~ 40℃
Maximum resistance to wind	Level 8
Operating frequency	902-928MHz (FCC Only) 2.400-2.4835GHz 5.725-5.850GHz (non-Japan) 5.650-5.755GHz (Japan Only)
Transmission power	900M FCC/ ISED：≤31dBm 2.4G FCC/ ISED：≤32dBm SRRC/CE/MIC/RCM：≤20dBm 5.8G (non-Japan) ; 5.7G (Japan) FCC/ISED/SRRC/MIC：≤33dBm CE/ RCM：≤14dBm
Hovering accuracy	Vertical: ±0.1 m (when the visual positioning is working normally); ±0.5 m (when GPS works normally) Horizontal: ±0.3 m (when the visual positioning is working normally); ±1.5 m (when GPS works normally)
GNSS	GPS/Beidou/Glonass/Gallieo
Internal storage	8GB
SD storage	max. support 256GB (UHS-3 or Class 10)
Gimbal
Gimbal	3-axis stabilization
Mechanical range	Tilt: -135° to +45°; Pan: -100° to +100°
Controllable rotation range	Tilt: -90° to +30°; Pan: -90° to +90°
Max control speed (Tilt)	300°/s
Angular Vibration Range	±0.005°

Remote controller and image transmission
Operating frequency	902-928MHz (FCC Only) 2.400-2.4835GHz 5.725-5.850GHz (non-Japan) 5.650-5.755GHz (Japan Only)
Transmission power	FCC：≤33dBm CE：≤20dBm@2.4G，≤14dBm@5.8G SRRC：≤20dBm@2.4G，≤33dBm@5.8G/5.7G
Max Transmission Distance (unobstructed, free of interference)	FCC：15km CE：8km
Display screen	2340x1080 60fps
Battery	1900mAh
Operating time	~2 hours (Max. Brightness) ~4 hours (50% Brightness)
Charging time	90 minutes
Internal Storage	ROM 128GB + expandable storage via micro-SD card
Sensing system
Sensing system type	Omnidirectional sensing system
Forward	Accurate measurement range: 0.5-18 m Effective sensing speed: <12m/s Viewing angle: Horizontal: 60°, Vertical: 80°
Backward	Accurate measurement range: 0.5-16 m Effective sensing speed: <12m/s Viewing angle: Horizontal: 60°, Vertical: 80°
Upward	Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: Horizontal: 65°, Vertical: 50°
Downward	Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: horizontal: 100°, vertical: 80°
Left and right	Accurate measurement range: 0.5-10 m Effective sensing speed: <5m/s Viewing angle: horizontal: 65°, vertical: 50°
Operating Environment	Forward, Backward and Sides: Surface with clear pattern and adequate lighting (lux > 15) Upward: Detects diffuse reflective surfaces (>20%) (walls, trees, people, etc.) Downward: Surface with clear pattern and adequate lighting (lux > 15) Detects diffuse reflective surfaces (>20%) (walls, trees, people, etc.)

Camera
Sensor	1 inch CMOS; 20M pixels
Lens	FOV: 82° 35 mm format equivalent focal length: 29 mm Aperture: f/2.8 - f/11 Focus range: 0.5 m to infinity
ISO range	Video: 100-44000 Photos: 100-6400
Shutter speed	Photo mode: 1/8000 ~ 8s Other: 1/8000 ~ 1/frame rates
Zoom	1-16x (up to 3x lossless zoom)
Photo mode	Single shot/Burst shooting/AEB/Time Lapse/HDR
Maximum photo size	54723648 (3:2) 54723076 (16:9) 3840*2160 (16:9)
Image Format	JPG (default) / DNG / JPG+DNG
Photo mode	5472x3076P30/P25/P24 3840x2160P60/P50/P48/P30/P25/P24 2720x1528P60/P50/P48/P30/P25/P24 1920x1080P60/P50/P48/P30/P25/P24
Video format	MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265)
Max bitrate	120Mbps
Supported file system	FAT32/exFAT
Battery
Capacity	7100 mAh
Voltage	11.55 V
Battery type	LiPo 3S
Energy	82 Wh
Weight	365 g
Charging temperature range	5℃ to 45℃
Storage temperature and humidity	-10~30℃，65±20%RH
Recommended storage temperature	22-28℃
Max charging power	93W
Charging time	90 minutes
Charger
Input	100-240 V, 50/60 Hz, 1.5A
Output	13.2 V ⎓ 5 A 5V⎓3A 9V⎓2A 12V⎓1.5A
Voltage	13.2±0.1V
Rated power	66W
Multi-Charger
Voltage	13.2 V
Charging temperature range	5℃ to 45℃

IN THE BOX

ATTENTION: Autel Robotics is introducing two different types of Smart Controllers and is pairing certain models with different bundle combinations. For this product, the 'Style' selection dictates the controller choice. Choosing the 'Rugged' style will yield a Smart Controller SE. Choosing either of the remaining two types will result in a Smart Controller v3.

The EVO II Pro Rugged Bundle includes : EVO II v3 6k Aircraft x1, gimbal cover x1, v3 6.4" Smart Controller SE x1, pairs of propellers x3, Smart controller USB-C Charging Cable & Power Brick x1, 110v Battery Charger (Wall cord and Power Converter) x1, Batteries x2, Pair of Spare controller sticks x 1, 32 GB SD card x1, Smart controller Hanging Neck Strap x1, Rugged Hard Case x1.

The EVO II Pro RTK Rugged Bundle includes: EVO II v3 6k Aircraft x1, gimbal cover x1, v3 7.9" Smart Controller x1, Controller case x1, Batteries x3, smart controller USB-C Charging Cable & Power brick x1, 110v Battery Charger (wall cord and power converter) x1, 12v DC Car Charger x1, Controller neck Strap x1, Attachment Port Cover x1, Pairs of Propellers x4, Multi-Charging Hub x1, Rugged Hard Case x1, pair spare controller sticks x1, 32GB SD card x1. Top Mount Accessory: RTK module.

The EVO II Pro Enterprise Bundle includes: EVO II v3 6k Aircraft x1, gimbal cover x1, v3 7.9" Smart Controller x1, Controller case x1, Batteries x3, smart controller USB-C Charging Cable & Power brick x1, 110v Battery Charger (wall cord and power converter) x1, 12v DC Car Charger x1, Controller neck Strap x1, Attachment Port Cover x1, Pairs of Propellers x4, Multi-Charging Hub x1, Rugged Hard Case x1, pair spare controller sticks x1, 32GB SD card x1. Top Mount Accessories: Speaker, Search Light, Strobe. RTK module sold separately.

Manuals come with each of the above bundles to include: Packing list, Quick Guide, Disclaimer & Safety Instructions, Battery Safety

VIDEOS

None available at this time

ACCESSORIES

GIMBALS (Camera Only)
EVO II 640T Gimbal v3

STORAGE

Hard Case
2-in-1 Hard Case

Don't see what you are looking for? Give us a call: 856-281-7545

EVO II PRO 6K v3 Series Bundles